Serpent Inflatable Flood Tubes
Large-Scale Flood Protection with Serpent™ Inflatable Tubes in Lee County
When major flood events threaten your property, Lee Flood Protection offers a rapid-response solution with Serpent™ inflatable flood control tubes. These full-scale barriers are air-filled and designed for fast, efficient deployment, making them ideal for commercial buildings, roadways, and large perimeters.
A 30-foot Serpent™ berm inflates in as little as 12–18 minutes, and multiple units can be connected to create an extended flood wall. Built for simplicity, the system delivers robust water resistance without the heavy lifting or manual fill of traditional barriers.
Available in 15-foot and 30-foot lengths with a 3-foot height capacity, Serpent™ offers serious flood defense with minimal effort. After use, each barrier deflates, rolls up, and stores compactly on pallets, ensuring your crew can deploy or retrieve them with ease when time is of the essence.
Inflatable
Easily inflates with a standard air pump.
3’+ High Protection
Protect up to 3ft in height against dangerous floods.
2 Lengths
Available in 15ft and 30ft lengths.
How It Works
1) Pressure Creates Support: Flowing water over the skirt of the Serpent™ will serve as ballast, keeping the Serpent™ inflatable flood barrier positioned securely when protecting against flooding
2) Damming Ability: The damming ability of the Serpent™ is up to around 40” of flooding, making this one of the highest off-the-shelf flood barriers available.
3) Ability to Connect: Serpent™ tubes can be fastened together into a longer inflatable flood protection barrier, using included velcro tube connector sheets.
Simple Setup
Roll Out
-
Unpack Serpent™ and transport to the protection site
-
Remove any larger rocks or obstacles
-
Unroll completely in direction the flood control is needed
-
Make sure skirt is facing the direction of flooding
Inflate
-
Unfurl Serpent™ to keep tube open and ready for inflation
-
Unscrew valve cap and use standard electric air pump with a standard “military valve” air hose adapter (similar to what is used for inflatable kayaks)
-
Once inflated, replace the valve cap to prevent air leakage
Stake (Dependant on Surface)
-
String rope through buckles on each Serpent™ tube
-
Tie a knot that a ground stake can be placed through
-
Insert ground stake through knot loop and tighten the line
-
Insert stakes through reinforced holes on skirt for added stability
Attach Sections as Needed To Lengthen Your Flood Barrier
-
Insert rope through metal loops on adjacent Serpent™ tubes
-
Tighten tubes to each other and close the spacing between tubes
-
Unroll and place velcro connector sheet over the two tube and velcro down to seal the gap
Contact Us
Request A Quote
If you’re interested in any of our products, please fill out the form below or call us directly at 239-579-3665!
Contact Us Today
